Welcome: Foshan Sound Technology CO.,Ltd.
Language:
∷
∷
∷
Features
• Up to 200 watts per channel into 4 ohms and 8 ohms.LA2-100 will provide up to 100 Watts and the LA2-200 will provide up to 200 watts per channel into Low-Z loads.
• The ENERGY STAR qualified LA is an efficient class-D design to conserve energy and reduce operational cost.
• Bridge outputs for higher power,the outputs of LA2-100 provide up to 250 watts, LA2-200 will deliver up to 350 watts Into 100V when bridged.
•Auto-Ramp circuitry ensures quiet and fast power up from standby and power-down after 25 minutes,it can reducing power consumption.
•The height is 1U, half rack width,save more space,and it can joining brackets enable easy under-table
and wall-mounting.
•LA2-100
LA2-100 can achieve output power of 60W per channel under 4ohms/8ohms constant resistances, and output power up to 200W RMS per channel can be achieved through bridge.Bridge can transferred to 100V constant voltage mode to achieve 250W output.80Hz high pass filter can be used in the bridge process under 100V constant voltage to ensure output power can drive loudspeaker, and haven’t low frequency.
•LA2-200
Under 4ohms/8ohms constant resistance, output power of each channel is up to 200W RMS, and output of 400W RMS can be achieved by bridge mode, bridge channel can transferred to 100V constant voltage to achieve 350W RMS output. In the process of channel bridge in 100V constant voltage mode, 80Hz high pass filter can be used.
•Amplifier ProtectionLA Series feature RMS and thermal limiting, protection against over current, short circuit, and under/over voltage,so that can extend operation life.
•Control and Mounting
LA Series come with multiple mounting options.LA Series come with a complete mounting kit allowing it to be rack mounted by itself or with a second unit in a 1RU space.Connecting brackets provide additional strength when rack mounting two amps together, but also make for simple under-table or wall mounting (like behind a TV).
|
|
LA2-100 |
LA2-200 |
|
|
Channels |
2 |
2 |
|
|
Stereo Mode (all channels driven) |
|||
|
8 Ω |
100W |
200W |
|
|
4 Ω |
100W |
200W |
|
|
Bridged Outputs (all channels driven) |
|||
|
8 Ω |
200W |
400W |
|
|
100V |
250W |
350W |
|
|
Frequency response (8 Ω and 4 Ω) |
20 Hz - 20 KHz +/- 0.1 dB |
||
|
Signal to noise (20 Hz - 20 KHz) |
>100 dB |
||
|
Input sensitivity |
1.23 V (+4 dBu) |
||
|
Gain at 8 Ω |
25dB |
30dB |
|
|
Output circuitry |
Class D |
||
|
Input impedance |
>10k, balanced or unbalanced |
||
|
Maximum input level |
12.3 V (+24 dBu) |
||
|
Cooling |
Convection |
||
|
Input connectors |
2 Channels |
3.5 mm Euro, 5 pins (green) |
|
|
4 Channels |
3.5 mm Euro, 10 pins (green) |
||
|
Remote connectors |
2 Channels |
3.5 mm Euro, 5 pins (black) |
|
|
4 Channels |
3.5 mm Euro, 10 pins (black) |
||
|
Output connectors |
2 Channels |
5 mm Euro, 4 pins (green) |
|
|
Front panel indicators |
Power,Signal(per channel ),Protect/Limit(per channel) |
||
|
Rear panel indicators |
Bi-Color LED Signal Limit/quiet/protect(per channel) |
||
|
Controls |
4 Ω/8 Ω low impedance operation,or 100 V Bridged Highpass |
||
|
General purpose inputs |
Remote volume, remote standby, on 3.5 mm connectors (10k potentiometer is not included) |
||
|
Highpass filter |
80 Hz in Bridged 100 V |
||
|
Dimensions |
43 mm x 220 mm x 241 mm |
||
|
Net weight |
1.6Kg |
1.6Kg |
|
|
Shipping weight |
2.7Kg |
2.7Kg |
|
|
Power requirements |
Universal Power Supply(active power factor correction) 100 - 240 VAC, 50 - 60 Hz |
||
|
Carton contents |
IEC Cable, quick start guide, connector pack, rack mount ears, mounting brackets |
||
*Peak power: depends on channel load
The inner and outer package size, net weight and gross weight reflected in the data are for reference only, and the exact value is subject to the label on the carton.
CS audio
CS audio
CS audio